How to Wood Stair Railing Basement

0

Its basement wood stair railing, which provides a way for people up and down the stairs to steady themselves. Drill holes at the four corners of paths you did. Insert the messages through the openings in the stair treads. Drilling two holes near the bottom of the posts and the side of the staircase.

Pushing pins through the holes in the side of the stairs and through holes in the posts. Go down the stairs again and slide the washers on the bolts then tighten the nuts on the ends of the screws, using a socket wrench, until the messages sit firmly in place. Mark and then cut where the edge of the stair rail touches the posts, and then open the clamp wood stair railing posts.

Place one end of a baluster one of the stair treads, balusters positioning so it touches the side of the lane. Mark a line on the baluster where the bottom edge of the stair rail crossing. Cut the baluster along the line you marked, using a handsaw. Mark and cut the other balusters, using the first as a template. Insert the balusters on the steps of the wood stair railing, so that they touch the bottom of the rail.

How to Install a Wood Stair Railing

Installing a wood stair railing can add an elegant touch, while providing the necessary security. Varnish the railing can add definition or visual contrast to the steps. Install a wood stair railing is a quick project that can be done by one or two people and avoids the danger of tripping or falling on stairs. Handrails for stairs come in variety of styles to match the decor, and all you need are basic skills in painting and carpentry to make scroll through your stairs safe.

Starts install a wood stair railing by measuring and marking the location of the handrail. Generally, the handrails are placed between 86-91 cm above the stairs, Mark the wall at the height scheduled for handrails, starting above the first step down, after one or two steps in the middle and then the step above.

Sand the railings thoroughly, first with sandpaper medium grain, and then with sandpaper fine grain. Softness is fundamental to the handrails, especially if they are to be used as support. Varnish the railing before installing. In the worst case, you might have to tweak a scratch after installation, but it is much easier than trying to apply the finish on the rail already placed.

Comments are closed.