Installing Accent Wall Tile on the Border of a Bathroom

0

Accent wall tile – Your bathroom should feel like your office party or party laboratory and spa-like retreat. Your bathroom is the place to do the job of making you look presentable for the day, for the preparation and implementation of various acts of hygiene. However, it is also the place where you can enjoy in the bath after a long day of running. Decorate your bathroom exactly as you see fit is the best way to make her feel like a comfort zone and efficiency. Installing a decorative border accent wall tile is one way to achieve this. Draw a line using pencil level as a straight edge. The line you draw must be placed approximately where you want the bottom edge of the ceramic. Criterion or comparable piece of wood along this line to act as a right to apply the tab of the ribbon edge.

Implement a complete “X” for ceramic adhesive on the back of each tile. Press each tile along the wood edge you’ve added, fixing them in place. Let dry overnight. Pour 3 cups of slurry in a plastic container. Slowly add small increments of 1/4 cup of cold water, mix with wooden stirrer, until you reach the consistency of the dough cake, thick but flexible. Moisten the grout with a damp sponge.
Extend the grout in the tiles with a rubber sponge applicator at an angle of 30 degrees. Push the grout into the cracks between the tiles. Use a dull to enter the most difficult areas stick. Clean surfaces with a damp sponge. After 40 minutes, wipe the accent wall tile with a paper towel. Allow the grout to dry overnight.

Comments are closed.