Sapien bookcase – will help it fit into your new device or can make it look new and pristine. Select oil paints and primers specially formulated for metal surfaces. Fill a bucket with warm water and add 1 tbsp. liquid dish soap. Mix until the water is sudsy. Clear bookcase thoroughly with a sponge and soapy water. Rinse thoroughly and allow to air dry for several hours. Put a drop cloth under Sapien bookcase.
Sand the entire sapien bookcase surface with medium grit sandpaper. This will rough up the old painted surface, so that the new paint and primer will adhere better. Wipe the excess sawdust off the shelf with a damp sponge. Let it dry completely. Brush a coat of primer on the shelf with a brush. Make sure the whole bookcase is coated. Using a thin but even layer of paint. Let it dry completely.
Dip a small paint roller in the paint and roll the most part of it out of a paint tray. Roller paint over large areas on the sapien bookcase, working from the top of the bookcase to the bottom. Roll the paint in one stroke and smooth it over with someone else. Not roll over an area more than that, which makes the cause air bubbles, and a rough surface. Continue until you have covered all the large surfaces with a thin but even coat of paint. Dip a brush in paint and remove as much excess as possible by sliding the brush along the paint cover. Brush the paint of all the areas you were unable to achieve with paint roller. This includes the space between the spine and the rack shelves.